Element Metal Finishes Sealer is a protective sealer and top coat designed to work on metal which has a rust activated finish. This clear coat chemically arrests the oxidized metal finish, minimizing any further corrosion, and then self-crosslinks to create a weather resistant barrier. Element Metal Finishes Sealer will form a film over the oxidized surfaces without cracking or yellowing. Element Metal Finishes Sealer may also be used on other non metal indoor or outdoor surfaces to protect and maintain the final finish.
Surface Preparation: Surface must be completely clean and dry, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion.
Coverage: 200-400 sq ft./Gallon. Coverage will vary depending on surface conditions, porosity, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary.
Storage: Store product in an area where the temperatures between 50-80º F. and not in direct sunlight. When properly sealed and stored, the shelf life of the sealer is up to 1 year. Store in flameproof metal cabinet.
Packaging: The sealer is available in 1 quart, 1 gallon.
Gloss Sealer
Stir before use. Apply by brush, medium nap roller or airless sprayer. If thinning is required, thin with xylene. Two coats are suggested for even coverage and appearance. Allow each coat to completely dry before applying the next coat. Sealer will darken the surface in order to enhance dull or faded surfaces.
Clean Up: Use Xylene or acetone. Dispose of container in accordance with local and federal regulations.
